Elitist
Home / Instruments /Accessories / Ordering / Tips / Friends
archtop.com
2008 Epiphone Broadway Elitist
Status: Pricing and hold status for all instruments currently available is shown on our Instruments page here. If this instrument does not appear on the Instruments page it has been sold, and is no longer available. Photos and descriptions of Previously Sold instruments may by found here. To be notified of examples of this model or similar instruments in the future, please contact [email protected],. Please be specific on which instrument(s) you're looking for, and we'll be happy to contact you as soon as they become available.
Serial #: T806869
Body size at lower bout: 17 " Scale length: 25 1/2" Fingerboard width at nut: 1 11/16" Body Depth: 3 3/8"
Finish: Natural blonde finish.
Materials: Solid bookmatched quartersawn spruce top; arched AAA flame maple back and sides; solid 3-piece maple neck with walnut center stripes; solid ebony fingerboard with abalone split- block inlay; compensated inlaid ebony bridge, 7-ply body binding, tripe-bound neck and peghead; bound soundholes; bone nut.
Hardware: All gold hardware includes twin Gibson 50SR/T USA humbucking pickups, Frequensator tailpiece, Tunematic bridge and Grover Super Rotomatic tuners; bound tortoise pickguard with epsilon logo; gold bell knobs; adjustable truss rod, medium jumbo frets; 3 way toggle switch.
Notes: One of the first models introduced by Gibson under the Epiphone label was the E-251/2 Broadway, a 17" twin pickup cutaway produced in the decade between 1959 and 1969. For almost three decades, the Broadway was unavailable, until Gibson's Epiphone division reissued a budget priced Korean made model, built like the originals with an all-laminate maple body. Finally, the firm issued the Elitist series, a limited run of premium instruments built with solid spruce soundboards, ebony fingerboards and other top-shelf appointments, and crafted in the prestigious Terada factory of Japan. Both Broadway and Byrdland Elitist guitars became instant player favorites, but have sadly been taken out of production as of this writing.
This immaculate example is fitted with a solid bookmatched quartersawn spruce top, arched AAA flame maple back and sides, solid 3-piece maple neck with walnut center stripes, solid ebony fingerboard with abalone split- block inlay, and a compensated inlaid ebony bridge. All gold hardware includes logo stamped Frequensator tailpiece, Tunematic bridge and Grover Super Rotomatic tuners, bound tortoise pickguard with epsilon logo and gold bell knobs. Fit and finish are stunning throughout, and the action is smooth and low over a gentle C profile neck. Tone is warm and rich with the twin Gibson 50SR/T USA humbucking pickups. An outstanding value in a true pro instrument, and now a very rare bird indeed. One only, in mint condition, call now.
Case: Original Epiphone deluxe plush hardshell case.
Setup: The frets have been precision leveled, recrowned and polished; trussrod tension and neck relief adjusted; bridge height adjusted; bridge compensation set; string slots at nut and bridge inspected and recut as necessary; bridge foot contour inspected and fit to top as necessary; bridge radius inspected and recurved as necessary; bridge wheels and tuners lubricated; fingerboard and bridge oiled; body and neck cleaned and hand polished.
This instrument is strung with medium gauge strings (.012-.054). The guitar will accommodate lighter or heavier gauge strings, according to preference. String action is set at 5/64" to 6/64" at the 12th fret, with moderate relief for acoustic playing with medium strings. The action may be lowered or raised to your requirements with the adjustable bridge.
